Before You Start
Note 1: Please stay close to the Yardian device when doing "Wi-Fi onboarding". |
Note 2: Check Yardian's LED status. The Yardian should be in Wi-Fi AP mode to proceed (LED blinking green and blue).
|
Note 3: If Yardian is not blinking in green and blue, please press and hold the Wi-Fi reset button for around 5 seconds and release when you see the LED blinking green and blue.
|
Wi-Fi Onboarding
From the Yardian App, click the Yardian Card and go to "Wi-Fi Onboarding":
Step 1. Select the Yardian SSID.
The Yardian App will scan for nearby wireless signals to provide you with a list of wireless networks to choose from. |
Step 2. Choose the network you normally use and input your Wi-Fi password.
This step applies to Android: Specify your home Wi-Fi router SSID # and password.
This step applies to iOS: Specify your home Wi-Fi router SSID #. |
Enjoy Using Your Yardian Controller
Check your Yaridan LED: if it turns into a solid green light, it means that you have successfully connected your Yardian to the Wi-Fi network.
Controlling your sprinkler system over the phone is only 1 step away - learn how to use the Yardian App.
Go to Wi-Fi Onboarding Troubleshooting
Comments
0 comments
Article is closed for comments.