Overview
Yardian's sensor port can be configured to support "rain sensor" or "flow sensor" on Yardian App.
You can set up your sensor in "Yardian Device Settings" on the "Home" tab of your App. If you have a flow sensor configured, the flow rate in Gallon Per Minute will be shown on the "Home" tab. Your water usage will be calculated based on the measured flow rate.
Note: Yardian supports wired flow sensors with on/off pulse output. If you can not find the sensor you use, please contact us at support@aeonmatrix.com.
Anomaly Notification
You will be asked to set up a baseline flow rate for each zone. The Yardian app will guide you through the process. Once a baseline flow rate is set up, your Yardian will notify you when the measured flow rate is higher or lower than a threshold (in percentage) you specified.
Compatibility
Hunter
- FCT100
- FCT150
- FCT158
- FCT200
- FCT208
- FCT300
- FCT309
- FCT400
Badger
- 228PV15
- 228PV20
- 228PV30
- 228PV40
- 735 1/2” S40
- 735 1/2” SDR 13.5
- 735 3/4” S40
- 735 3/4” SDR 21
- 735 1” S40
- 735 1” SDR 21
- 228BR20
- 228BR25
- 228CB20 150 PSI
- 228CB20 400 PSI
- 228CB25
- 228SS20
- 250BR05 sch40 PVC
- 250BR05 sch80 PVC
- 250BR05 sch40 steel
- 250BR05 Type L
- 250BR07 sch40 PVC
- 250BR07 sch80 PVC
- 250BR07 sch40 steel
- 250BR07 Type L
- 250BR10
- 250BR12
- 250BR15
CST
- FSI-T10-001
- FSI-T15-001
- FSI-T20-001
- FSI-S30-001 (Suggested Range 6~300 GPM)
- FSI-S40-001 (Suggested Range 10~480 GPM)
- FSI-B15-001 (Suggested Range 3GPM~90GPM)
Toro
- TFS-050
- TFS-075
- TFS-100
- TFS-150
- TFS-200
- TFS-300
- TFS-400
Rain Bird
- FS200B
- FS150B
- FS100B
- FS400P
- FS300P
- FS200P
- FS150P
- FS100P
Cashtec
- LFS-020PHN0-PVNO
Please contact us at support@aeonmatrix.com if your flow sensor is not in the list.
Comments
0 comments
Article is closed for comments.